Reasons why a dental office needs to be equipped with First Aid Bag

There are a number of reasons why a dental office needs to be equipped with proper first aid supplies. The two most common reasons for keeping a proper first aid kit is for patient emergency as well as staff emergency. Patient incidents are quite rare but in order to achieve appropriate patient and staff safety a proper first aid bag needs to be kept it every dental office. endodontic endo motor

OSHA (Occupational Safety and Health Administration) requires that every dental office must have first aid supplies ready in case of any emergency. There are approved American National standards to put together employee first aid kits, but you can also put together your own.

Most first aid bags are made up of sterile adhesive bandages, soap, elastic bandages, gauze, tape, absorbent compress, adhesive bandages, medical tape, lubricant, thermometers, antibiotics, tweezers, scissors, latex gloves, tongue blades, cold packs, safety pins, antiseptic applicators, burn appointment and a splint. Many offices keep this employee first aid kit upfront with their office supplies.

A patient emergency kit usually has to contain a few extra items. Ultimately the patient emergency kit will vary based off of state requirements and it must include all of the aforementioned features from the employee emergency kit. The additional items in a first aid bag for patients include epinephrine, a histamine blocker, nitroglycerin, an asthma inhaler, sugar, and acid and pain reliever. The patient first aid kit must also have an oxygen delivery system and some dentists may even consider using an automated defibrillator portable dental unit.

You are placing your offices at risk by not having first aid bags available on-site. Be sure to look into your state requirements for what is needed inside of each first aid bag, and always be sure to keep them well-stocked in case of emergency.

Advertisements

Le bois autoclave dentaire classe b vous connaissez ?

Le bois autoclave classe b est un bois qui a subi un traitement en profondeur afin d’être protégé des agressions biologiques (insectes – champignons) responsables de la déterioration du matériau.

Pour pallier à la putrescibilité du bois, le bois autoclave reçoit des traitements qui prolongent sa durabilité

Les produits de préservation
Ils sont à base de matières actives dispensées en très faibles quantités et que l’on retrouve dans les domaines phyto-sanitaires et pharmaceutiques.

Ils sont tout à fait autorisés par la Directive Biocide Européenne, officialisés en France par décret. Ces produits sont sous certification CTB P+ qui intègre la notion d’efficacité et une évaluation santé-environnement par des experts tox-écotox indépendants.

Les classes d’emploi
Afin de définir le degré de risques encourus par le bois selon les conditions de son utilisation, un système de classement a été mis en place.

Il existe 5 classes, et les entreprises adhérentes s’engagent à respecter la normalisation en vigueur :
CLASSE 2:Bois toujours à l’abri des intempéries. Humidification possible par
condensation occasionelle
CLASSE 3:Bois soumis à des alternances d’humidité et de sécheresses,
sans contact avec le sol et sans pièges à eaux (ex. bardage)
CLASSE 4:Bois en contact avec le sol. Bois immergé en eau douce.
Bois soumis à des humidifications fréquentes ou permanentes

L’autoclave de table vide et pression
L’autoclave vide et pression permet d’agir jusqu’au coeur du bois, à  la différence du trempage qui n’agit qu’en surface. L’imprégnation est de  100 à 500 Litres par m³.

Le principe de ce procédé est de remplir toutes les cavités du bois de produit traitant. Dans un premier temps, le bois est ventilé à l’aide d’un vide très fort, puis le produit traitant est ajouté, sous maintien du vide, et pressé profondément dans le bois par surpression.

Un bois bien traité est conforme aux spécifications de la norme française NF B 50-100-3

What Does Dental Laboratory Equipment Include?

The following is a list of materials and sources for the detal lab equipment and supplies which are recommended for the procedures taught in the Concept of Complete Dentistry seminars. Since materials are constantly being upgraded or changed, please double check with suppliers to make certain the information is current at the time of your order.

To help you get started in the methods being taught, three companies have been invited to display at the seminars. They are here to help you and to inform you by answering your questions. They make a continuous effort to have available the variety of materials that relate to what is taught, and they can show you how to use equipment and materials.

The Oyodental receives donated materials from some of these sponsors for courses. Royalties are received on the Combi instrument system, which Dr. Dawson designed. Also, The Oyodental receives payment from the sale of Dawson Diagnostic Wizard & SolutionReach in exchange for content provided for the products.

Nowak Dental Supplies offers only the best in dental lab supplies and equipment. We have everything you need for your lab or office from a porcelain oven to a microscope to a milling machine. We also offer a variety of items at great prices, so you can select the best supplies for your dental laboratory or office. For instance, we offer a variety of porcelain oven models to allow you to make the best decision for your dental lab. Whatever your dental equipment needs entail, we can help!

Select a group below or click here to browse.

 

 

 

Treatment after Failed Root Canal Therapy

In case of root canal failure, re-root canal treatment, Apicoectomy or tooth extraction may also be required to remove the infection from the tooth. Dentist will evaluate the condition of the tooth and will decide that whether tooth can be saved or not. If he thinks that prognosis of tooth after root canal treatment or Apicoectomy is not good, then he will pull the tooth out. If tooth extraction is required, then missing tooth can be replaced with dental implants, dental bridges or partial dentures. Dental implants are the best option for replacement of missing tooth.   (dental apex locator)

Dental Implants after Tooth Extraction 

Root canal retreatment can be done to save the tooth and tooth and remove the infection in root canal treated tooth. Procedure of root canal re-treatment is somewhat similar to root canal treatment and is mainly performed by an endodontist who is specialist in performing root canal procedure.

Apicoectomy that is surgical removal of root apex may be required to remove the infection from the tooth. To seal the root, small filling (retrofill) is used.

Bone Removal for Apicoectomy

Success rate of root canal treatment is not as high as root canal treatment done for the first time. Root canal treatment success rate is 50%-75%. If re-infection occurs after root canal re-treatment, then tooth extraction may also be required.
See more:oyodental

What whitening treatment options are available?

Power whitening can be performed with or without light technology. Light technology is referred to as photopolymerization and was first approved by the FDA for teeth whitening in 1996. There are two light techniques that can be used: blue-light or argon laser light. Both techniques require about one hour in the dental chair. Application of a high concentration hydrogen peroxide is applied to the tooth surface four times at 15-minute intervals. Both light systems claim to work by accelerating the chemical reaction. This provides faster, more effective results. There are some concerns associated with the light generating heat and the possible adverse effect it may have on the teeth. Additionally, recent debate has spurred further examination in the dental community about how necessary the light actually is in the process.

Power whitening without light technology simply uses an in-office application of a high concentration of hydrogen peroxide to jump-start the process.

Both techniques ( best dental curing light with or without light technology) will usually include an at-home whitening process involving custom trays made by a dental professional. A whitening agent is placed in the trays and they are worn usually once a day for up to three hours. The length of time worn and duration is determined on factors considered by you and your dentist. Custom trays are made to continue the whitening process at home and ensure you achieve optimum whitening results.

The primary benefit of power whitening is that the process takes only one in-office visit and results can be dramatic and almost immediate. The disadvantages include cost. Power whitening is significantly more costly than other methods. You are paying for the technology, professional application and guidance along with the convenience of fast results. Also, due to the high concentration of peroxide used, hypersensitivity is a likely side effect. For those who typically experience tooth sensitivity, power whitening may not be the best method. (teeth whitening machine)

Custom trays
Custom-fitted trays are made by first taking impressions (molds) of both upper and lower teeth. Flexible clear plastic trays are fabricated to fit precisely to your teeth. The benefit of custom trays is supported by literature that states whitening effectiveness is directly related to the percentage of peroxide and length of time it is in direct contact with the tooth surface.

With a custom tray the whitening agent is able to remain in direct contact with each tooth, allowing for more accurate and uniform whitening with less chance of seepage and gum irritation. Trays also allow for convenience of re-treating and touch-up as needed. Custom trays are typically more affordable than power whitening. However, a disadvantage in using trays is the self-placement factor, which can sometimes be a little messy and difficult to work with.

 

What Teeth whitening treatment options are available?

Power whitening can be performed with or without light technology. Light technology is referred to as photopolymerization and was first approved by the FDA for teeth whitening in 1996. There are two light techniques that can be used: blue-light or argon laser light. Both techniques require about one hour in the dental chair. Application of a high concentration hydrogen peroxide is applied to the tooth surface four times at 15-minute intervals. Both light systems claim to work by accelerating the chemical reaction. This provides faster, more effective results. There are some concerns associated with the light generating heat and the possible adverse effect it may have on the teeth. Additionally, recent debate has spurred further examination in the dental community about how necessary the light actually is in the process.

Power whitening without light technology simply uses an in-office application of a high concentration of hydrogen peroxide to jump-start the process.

Both techniques (apex locator for sale) will usually include an at-home whitening process involving custom trays made by a dental professional. A whitening agent is placed in the trays and they are worn usually once a day for up to three hours. The length of time worn and duration is determined on factors considered by you and your dentist. Custom trays are made to continue the whitening process at home and ensure you achieve optimum whitening results.

The primary benefit of power whitening is that the process takes only one in-office visit and results can be dramatic and almost immediate. The disadvantages include cost. Power whitening is significantly more costly than other methods. You are paying for the technology, professional application and guidance along with the convenience of fast results. Also, due to the high concentration of peroxide used, hypersensitivity is a likely side effect. For those who typically experience tooth sensitivity, power whitening may not be the best method.

Related goods:
dental intraoral camera usb

Several Types of Rotary Endodontic Instruments

Are you victim of marketing, Struggling/aspiring to Do Good/great Endo-CLICK HERE

Even untreated case Heals -see pic below, tooth with vital pulp in apical area also will recover more easily, but as a professional you are resonsible to give all patients best chance to HEAL- by doing a complete cleaning..with focus in apical area (dental pulp tester)

pic B after 31 months, crown is breaking down, apical is healing SEE DETAILSThere are over 65 Systems today in market, how they differ, which one will help you get better success ? Here is a list of almost all systemsWHY Protaper is dangerous -they strip healthy dentine and tend to cause more fracture …CLICK HERE+++++LINK 2Most important quality of your Endodontic instruement is flexibility, Test your instrument to determine its stiffness, greater the rigidity of instrument, more chance of breakage and failure- see video below 
Now with the advent of CBCT many things are becoming clear. Inefficiency and problems of tapered instruments were not being detected in 2 D radiographs. As you can see in the pic, we have super imposed a popular tapered instrument on a typical root canal. And you can see how it will transport the canal/cause strip perforation because of its rigidity. Please try and test and flexibility of your tapered instrument and compare it to the natural shape of the canal. Tapered system do not properly clean apical area as was found in this CBCT study CLICK HERE

Related Goods:endo motor for sale

How Does A Dental Ultrasonic Scaler Work?

The purpose of using best ultrasonic scaler is to facilitate the removal and elimination of agents which cause inflammation to the teeth, plaque and its products, as well as calculus. The term “calculus” is used to refer to a kind of dental plaque that has hardened over time. This condition is caused by the consistent accumulation of saliva on the plaque, and which may already be deposited on the teeth. With the rough surface providing a favorable environment for the increased formation of calculus, dental ultrasonic scalers make for a viable choice of equipment fit for use in eliminating this problem.

Scaling, when done professionally and thoroughly, ensures that the periodontium is free of harmful agents and disease. The periodontium is the mass of tissues which surround the teeth and provide support for the same. As a result of using these ultrasonic scalers effectively the teeth are maintained securely in the maxillary and mandibular bones, and which in turn helps to keep your teeth strong.

In performing its function the tip of the ultrasonic scalers vibrates following a pattern which depends on the power rating as well as the type. The water gets energy in the process of passing over the tip in order to provide cavitations and thus create an action similar to that of scouring.

Dental ultrasonic scalers work rapidly during the removal of calculus from the surfaces of the teeth. They do this via vibration actions ranging between twenty thousand and forty five thousand times per second. Most of the power, and consequently heat, for this device is focused at the tip, and which is effectively cooled using a jet of water. It is thus important to keep the scaling tip in motion over the teeth because of the heat that it generates. www.oyodental.com, as well as other professionals in the field, advises that no more than ten seconds should be spent on the same tooth. In addition to this, only a single ounce of pressure needs to be used. It is obviously important to provide and follow the stipulated guidelines and especially when it comes to people’s health. For this reason, this procedure should only be carried out by professional dentists as any errors may even result in patients losing their teeth.

As a dental health professional looking for dental ultrasonic scaler, there is a wide variety of these available in the market, each with its benefits and drawbacks. They are available in different shapes, with some actually having interchangeable tips and thus providing added effectiveness at a lower price, this compared to a situation whereby you have to buy different devices for the different tips. There are also new variants which are able to carry their own supply of water. As a general rule though, finer action is experienced from devices with thinner tips.

Source:http://www.oyodental.com/How-Does-A-Dental-Ultrasonic-Scaler-Work

How does a brushless electric dental micromotor work?

The article how does a brushless electric dental micro motor work? explains how brushed motors work. In a typical DC motor, there are permanent magnets on the outside and a spinning armature on the inside. The permanent magnets are stationary, so they are called the stator. The armature rotates, so it is called the rotor.

The armature contains an electromagnet. When you run electricity into this electromagnet, it creates a magnetic field in the armature that attracts and repels the magnets in the stator. So the armature spins through 180 degrees. To keep it spinning, you have to change the poles of the electromagnet. The brushes handle this change in polarity. They make contact with two spinning electrodes attached to the armature and flip the magnetic polarity of the electromagnet as it spins.

This setup works and is simple and cheap to manufacture, but it has a lot of problems:

The brushes eventually wear out.
Because the brushes are making/breaking connections, you get sparking and electrical noise.
The brushes limit the maximum speed of the motor.
Having the electromagnet in the center of the motor makes it harder to cool.
The use of brushes puts a limit on how many poles the armature can have.

With the advent of cheap computers and power transistors, it became possible to “turn the motor inside out” and eliminate the brushes. In a brushless DC motor (BLDC), you put the permanent magnets on the rotor and you move the electromagnets to the stator. Then you use a computer (connected to high-power transistors) to charge up the electromagnets as the shaft turns. This system has all sorts of advantages:

Because a computer controls the motor instead of mechanical brushes, it’s more precise. The computer can also factor the speed of the motor into the equation. This makes brushless motors more efficient.
There is no sparking and much less electrical noise.
There are no brushes to wear out.
With the electromagnets on the stator, they are very easy to cool.
You can have a lot of electromagnets on the stator for more precise control.
The only disadvantage of a brushless motor is its higher initial cost, but you can often recover that cost through the greater efficiency over the life of the motor.

For more information on brushless micro motor, check out the next page.

Source:http://www.oyodental.com/blog/2016/02/06/how-does-a-brushless-electric-dental-micromotor-work/

Key features to consider when choosing an dental intraoral camera

Tags

If your goal is to increase your case acceptance, and therefore profitability, showing patients really big pictures of their teeth beats showing patients unbelievably quick radiographs of those same teeth.
High-tech guru (and all-around good guy) Dr. John Jameson passes along this information to us:
“For doctors who capture digital images of the patient, as well as ‘befores and afters’ of other cases for consultation purposes, we have seen an increase between 10 and 25 percent in case acceptance.”
So, for those of you struggling to gain patient acceptance of high-quality comprehensive treatment, an intraoral camera is your best high-tech investment. That part is easy. Deciding which camera(s) to purchase, how to integrate them into your facility, and how to take full advantage of their wonderful attributes is a more of a challenge.

Quality of construction: How does the camera dock with the light source? Does it appear capable of withstanding 2,000 insertions and detachments a year? Does the wand cord have strain relief or will it ultimately fray and create “water spots” on image displays and printouts?
Depth of field: As you move the wand inside the mouth, how much of the viewing area is in focus? Do you have to continually adjust the focus ring? Superior intraoral cameras require little or no focusing inside the mouth.
Artifacts: How much of what you see is actually there? The best way to judge an dental intraoral camera image is to have an in-office demonstration. Only then can you compare what you see in the mouth (under typical operatory lighting conditions) with what appears on the monitor display. You have no frame of reference on the convention floor to judge image quality and the presence or absence of artifacts.

Related goods:http://www.oyodental.com/